Kinetics | Metal Injection Molding

MIM 17-4 H900

Material Properties	MPIF Standard 35		Kinetics
Material Properties	Minimum	Typical	Typical
Ultimate Strength (KSI)	155	172	175
Yield Strength (KSI)	140	158	158
Elongation (% in 1")	4.0	6.0	6.0
Reduction in Area (%)	-	-	21
Surface Finish (Ra)	-	-	30
Macro Hardness (R15N)	-	-	80
Sintered Density (g/cm³)	-	7.5	7.7

Material Description:
Precipitation-hardening stainless steel. Offers a good balance between corrosion resistance and strength. Magnetic. Hardenable to various strength levels and hardness by varying the aging heat treat temperature. Typically provides better corrosion resistance than the 400 series stainless steels, and better strength than the 300 series stainless steels. Often used for aircraft, dental, marine, medical, surgical industries, and applications where high levels of strength, hardness and good corrosion resistance is required.

Material Composition (%):

Fe	Ni	Cr	C (Max)	Cu	Nb + Ta	Mn (Max)	Si (Max)
Balance	3-5	15.5-17.5	0.07	3-5	0.15-0.45	1.0	1.0

Click Here to Print This Page